Overview
The TekStrap™ fastening system is designed to secure countertop laboratory instruments while allowing for quick and easy movement of the item for service and relocation.
Installation Instructions
- Locate the position on the countertop or backsplash where the item will be located and clean the surface.
- Remove backing from mounting plate and secure to either countertop or backsplash, depending on the height of the item and the countertop.
- Locate desired points on the side of the item to which the adhesive clip plates will be adhered. If fastening a painted item, simply clean the surface with alcohol and allow it to dry for five minutes. If fastening a Stainless steel item, first scrub the surface where the plates will be adhered using alcohol and a Scotch-Brite™ type scrub. Dust with a clean cloth and rub the area with the alcohol pads; allow to dry for five minutes
- Peel the release paper from the back of the plate and press firmly into place.
- Adjust straps to allow a little slack in the tension
*NOTE: Do not put tension on straps until adhesive has reached the recommended 72-hour cure time.
Size
-
Weight:1.20 LBS
-
Width:10.00
-
Height:10.00
-
Depth:2.00
Request Pricing Form
"*" indicates required fields
