Water Cooler Fastening Kit

Overview

Protects your water supply by securing the water bottle with a quick-release cinch strap, and secures the cooler unit with easy-to-install Velcro® fasteners.

Kit Includes:

(1) Cooler Strap w/Velcro® fasteners, (1) quick-release water bottle strap, (2) toggle bolts, (2) lag/tek screws for wood or metal studs, and alcohol cleaning pads.

Installation Instructions:

1. Slide the water cooler away from the wall. Use a stud locating device and mark the location of the wall stud.
2. Attach the wall plate for the cooler base near the top of the base unit. The wall plate for the water bottle should attach at just above the center of the bottle. (Use the wood screws for wood, metal screws for metal, or a toggle bolt for hollow wall board.)
3. Feed the straps through the mounted wall brackets and put the water cooler back into place with the brackets as close to the center as possible.
4. Locate the area on the base unit where adhesive-backed Velcro® fasteners will attach. Clean the surface with alcohol pads, allow to dry, and wipe off any residue.
5. Peel the release paper backing of the Velcro® fastener and press it into place. 6. Wrap the bottle strap around the water bottle and through the spring buckle (back side first). Pull the strap snug and wrap the excess strap over and through the buckle.

Part #:

• WC 2165S – Silver/Grey
• WC 2165W – White
• WC 2165B – Black

Size:

• Weight:1.00 LBS
• Width:4.00
• Height:8.00
• Depth:1.00